▷Specification

◼ Particle Size Range : <10nm to 10μm

◼ Collection Substrate : Sterilized commercial swab

◼ Collection Efficiency : >95%

◼ Maximum Particle Concentration : Zero to 105 particles/cm3

◼ Condensing Fluid : Water, distilled or cleaner

◼ Sample Flow Rate : 1.2 L/min

◼ Sampled Aerosol Conditions : Non-corrosive, 0 – 40 degrees C 

◼ Sample Method : Sterile swab can be pretreated with genomic preservative

◼ Sample Duration : 2 preset options user selectable from 1 minute to 24 hours

◼ Controls : 3-position dial for setup and sample start duration (2 preset times)

◼ Status Indicator Lights : 4 color LED indicating warm up/ready (yellow), 

sampling/setup (green), standby/of (blue), error (red).

See manual for details.

◼ Communications : USB serial communications for setting sample time options;

output for sampling parameters and instrument status, Firmware updatable with flash drive

◼ Environmental Operating Conditions : 10 – 35 degrees C, 10 – 95% RH, non-condensing

◼ Sample Inlet : 10mm OD SS tube

◼ Sample line cleaning : Ozone, alcohol rinse, hydrogen peroxide

◼ Instrument Decontamination : Recommend vaporized hydrogen peroxide

◼ Power : 90-240 VAC/50-60 Hz; power supply output voltage is 12.0 V DC

◼ Noise : Quiet for unobtrusive sampling

◼ Case Dimensions : 9.5”H x 8.4”W x 8.0”D (24.1cm x 21.3 cm x 20.3cm)

◼ Weight : 10 lbs (4.5kg)

▷Applications

Collection of microorganism(viruses, bacteria, fungal spores, toxins, proteins, allergens)